There is a four-position selector switch that selects the desired modulation effect. You can switch between Chop, Tremolo / Pan , and two combination effects we call Stir and Shake (these are all represented by icons in some pedals).
On the left side, the ratio control changes the pulse or chop width (square wave tremolo) from short to long.
On the left side, the rate control controls the chop rate when the slide switch is set to ‘preset’.
On the right side, the depth control adjusts the tremolo from 15% to 100% modulation depth.
On the right side, the rate control varies the tremolo speed when the slide switch is set to ‘preset’.
The LCD read out displays the modulation frequency in either Hz or Midi Beats per Second.
All analog circuitry, crystal clear sound, wide dynamic range, no coloration.
Easy to use. No programming or scrolling through patches required.
MIDI-in socket and sync controls allowing 1/2/3/4/8 modulations per MIDI clock beat.
Bright blue backlit LCD screen showing modulation rate / frequency / sync status.
Easy to use. Patented ergonomic design with the control knobs facing you. The unique pedal shape allows more controls in a smaller footprint.
Reliable, wear-free, noise-free, pop-free optical operation. Bypassed when the pedal is all the way back (heel down).
Mono in, stereo out, even when in bypass mode. Both outputs are equal with zero gain.
9VDC working with around 30mA current consumption. 9V AC power adapter recommended for gig or studio use.
Will accept standard 2.1mm power supply plug, center negative.
Flashing blue and red LED’s to show modulation rates.
Compact Size: 9” x 4” (228mm x 103mm).
Lightweight, high-quality aircraft aluminum casting and rugged construction, only 2.2lbs (1.1kg).